Fusion 430 /Fusion Black 430User’s ManualManuel de l’utilisateurAnwenderhandbuchManuale per l’operatoreManual del usuarioপᡅ䂀ᯢTMMedia Components
1At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly
2The Triple Chamber structureUpon opening the top panel, you will find that the case is divided into three chambers – the power supply chamber, the mo
3reversing the connection. For more info on connecting LEDs to your motherboard, see your motherboard manual.5. The Hard Drive LED (labeled HDD LED) c
4FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE 1394 connector, you will need a FireWire Internal Adapter. To order o
51. Make sure the power supply is off and unplugged before installing any hardware.2. Connect the 3-pin power cable from the display to the 3-pin c
63. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device.Cooling System The 120mm TriCool™ fan
7When used with the CPU Air Guide, fresh air from the rear air intake can be directed to the CPU cooler to enhance the CPU cooling. The CPU Air Guide
Antec, Inc.47900 Fremont Blvd.Fremont, CA 94538USAtel: 510-770-1200fax: 510-770-1288Antec Europe B.V.Stuttgartstraat 123047 AS RotterdamThe Netherland
Kommentare zu diesen Handbüchern