Antec Dark Fleet DF-35 Bedienungsanleitung PDF herunterladen (Seite 20)

One example of AHCI configuration – your motherboard may vary

LOADING THE FLEET-SWAP BAYS

Fleet-Swap™ bays are designed to be accessible from the front of the case, through the Fleet-Release™ access

doors.

1. Open the Fleet-Release™ access door, and insert your 3.5” SATA device into a 3.5” drive bay that

contains a Fleet-Swap bay at the back.

2. Push gently until it engages the adapter pins on the Fleet-Swap bay and stops in position. Do not

secure the device with screws if you want it to be removable.

Loading a Fleet-Swap drive.

3. Mount any other 3.5” HDD devices accordingly.

4. Close the Fleet-ReleaseTM Access Door.

UNLOADING THE FLEET-SWAP™ BAYS

1. Ensure that your HDD is not in use.

2. Open the Fleet-Release

Access Door by pressing the left side to release it, and then swing it open.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Keine Kommentare

Antec Dark Fleet DF-35 Bedienungsanleitung Seite 20