Antec DF-85 Datenblatt PDF herunterladen (Seite 21)

Moving or removing a Fleet-Swap™ bay

3. Now move the Fleet-Swap bay to the desired location, secure it in place and screw it in. Fleet-Swap

bays can be relocated to anywhere in the 3.5” drive cage.

4. Before you can use the hot-swap feature of the Fleet-Swap™ bays, you must install all related drivers

for your motherboard and enable the “AHCI” function in the BIOS to activate the hot swap feature.

One example of AHCI configuration – your motherboard may vary

B. LOADING THE FLEET-SWAP BAYS

Fleet-Swap™ bays are designed to be accessible from the front of the case, through the Fleet-Release™ access

doors.

1. Open the Fleet-Release™ access door, and insert your 3.5” SATA device into a 3.5” drive bay that

contains a Fleet-Swap bay at the back.

2. Push gently until it engages the adapter pins on the Fleet-Swap bay and stops in position. Do not

secure the device with screws if you want it to be removable.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Keine Kommentare

Antec DF-85 Datenblatt Seite 21